The global site of the UK's leading magazine for automation, motion engineering and power transmission
28 March, 2024

LinkedIn
Twitter
Twitter link

IO-Link Safety gets first live multi-vendor demo at SPS

21 November, 2022

More than ten automation companies took part in the first live multi-vendor demonstration of IO-Link Safety at the recent SPS trade fair in Nuremberg. The demonstration covered all communication levels, from failsafe PLCs to IO-Link Safety masters and IO-Link Safety devices. According to the organisers, it was the first time that IO-Link Safety had been shown working with IO-Link Standard at a public event.

IO-Link Safety expands machines and systems automated via IO-Link with functionally safe components and communications. IO-Link’s standard connection and transmission technologies can be used unchanged, making it easy to deploy the safety functions. IO-Link Safety is being standardised as IEC 61139-2.

In the SPS demonstration – which linked products from suppliers including Siemens, SEW-Eurodrive, Sick, SMC, Pilz, Festo, Euchner, Murrelektronik, HMS Networks and Phoenix Contact – a failsafe PLC was shown communicating with IO-Link Safety masters via Profinet and Profisafe. Light grids, door locks, control and signalling boxes, e-stop buttons and safe drives, were integrated into the application as IO-Link Safety devices.

To demonstrate the interplay between IO-Link and IO-Link Safety, an IO-Link text display and an IO-Link signal light provided status indication.

The application also demonstrated a mixed communication mode where safety-oriented and standard data are exchanged with the same IO-Link device at the same time. This makes IO-Link Safety particularly useful for safe drives, door locks and control boxes, among other things. Non-safety functions can be programmed as usual, while only safety-oriented functions are controlled and monitored by a PLC failsafe program.

Part of the multi-vendor demonstration of IO-Link Safety at SPS

Device engineering for IO-Link Safety is carried out using IO-Link’s IODD (IO Device Description) language. If an IO-Link device supports device-specific and safety-oriented parameters, a safety tool from the device manufacturer can be used in addition to the IODD. A standardised interface is available for integrating the tool into the IO-Link engineering software.

External pre-configuration can be carried out using a USB IO-Link master. This provides IO-link Safety functions in conjunction with the engineering software, allowing safety functions to be tested before installation.




Magazine
  • To view a digital copy of the latest issue of Drives & Controls, click here.

    To visit the digital library of past issues, click here

    To subscribe to the magazine, click here

     

Poll

"Do you think that robots create or destroy jobs?"

Newsletter
Newsletter

Events

Most Read Articles