The global site of the UK's leading magazine for automation, motion engineering and power transmission
28 March, 2024

LinkedIn
Twitter
Twitter link

Contact-free technology carries power, signals and data

23 March, 2013

TE Connectivity has developed a technology that transmits power, signals and data in almost any environment without needing physical connectors or contacts. The Ariso system integrates wireless power and radio frequency (RF) technologies and is said to combine the reliability of contact-based connections with the flexibility of contact-free connections.

“We have developed a technology platform that will revolutionise how we connect to the world,” says TE’s chief technology officer, Ulrich Wallenhorst. “Imagine a world where water or dust is not a factor in making sure that you can deliver power or data.”

He adds that the technology will allow power to be transmitted wirelessly, through water, walls or materials such as glass. “This innovation has the capability to change many industries, from electronics, food and beverages, to automotive, consumer – and, ultimately, manufacturing – in a historic way.”

The system is currently available in M12 and M30 formats. The M12 version can transmit 6W at 24V, while the M30 version can handle 12W at 24V. The technology currently has a 500Hz bandwidth for analogue signals and 1kHz for GPIO applications. Future versions will support data rates up to 1Gb/s, making them suitable for field bus communications.

The transmission range depends on the diameter of the transmitter/receivers. They can typically deliver maximum power up to about a third of the diameter of the couple. For M12 versions, that means a gap of 3mm.

The technology is aimed, in particular, at applications with moving parts and electronics that need to be connected in harsh environments. Because there is no physical contact, there is almost no wear and tear. Installation and maintenance costs can be reduced, and safety and ease-of-use can be improved.

According to TE, the new technology can:

Cut maintenance costs Around 70% of unplanned downtime in applications such as robotics is caused by connector or cable failures. The contactless technology can reduce this dramatically because there is no wear and tear on the connector.




Magazine
  • To view a digital copy of the latest issue of Drives & Controls, click here.

    To visit the digital library of past issues, click here

    To subscribe to the magazine, click here

     

Poll

"Do you think that robots create or destroy jobs?"

Newsletter
Newsletter

Events

Most Read Articles