The global site of the UK's leading magazine for automation, motion engineering and power transmission
27 February, 2024

Twitter link

New standard will produce more accurate motor efficiency ratings

28 March, 2008

A new global standard for testing the efficiency of low-voltage motors should result in more accurate efficiency figures, making it easier for users to select the most appropriate motor for an application.

Unlike the previous standard, which was based partly on estimated values, the new IEC/EN 60034-2-1 standard is based on measured values of losses. For example, winding and rotor losses will determined by measuring temperature rises.

The standard also tightens up on calculations of additional load losses that result from the magnetic flux created as a motor is running. Previously, these losses were estimated at 0.5% of the input power at the rated load. This resulted in efficiency figures that were generally too high.

The new standard allows for the additional losses to be measured and requires motor manufacturers to state how they have measured their efficiency values. Accurate measurement of the additional losses is expected to result in slightly lower efficiency figures for many motors – although this does not mean that the motor’s design or performance has changed.

Some motor manufacturers have already started to re-test their motors to the new standard. ABB, for example, is using accurate equipment to measure the additional losses and plans to publish the new efficiency values in its catalogues during 2008.

"We welcome the fact that the efficiency measurement standards for electric motors are becoming more harmonised worldwide," says ABB’s Steve Ruddell. "We have waited a long time for a level playing field to be introduced."

  • To view a digital copy of the latest issue of Drives & Controls, click here.

    To visit the digital library of past issues, click here

    To subscribe to the magazine, click here



"Do you think that robots create or destroy jobs?"



Most Read Articles