The global site of the UK's leading magazine for automation, motion engineering and power transmission
30 June, 2022

Twitter link
All-electric forklift gets rid of hydraulics
Published:  01 June, 2002

All-electric forklift gets rid of hydraulics

SKF has replaced the engine and hydraulics in a forklift truck with batteries and electric actuators, to produce an all-electric forklift that it claims has many advantages. The prototype six-tonne vehicle, called the E-truck, is propelled by in-hub DC motors, is steered mechatronically, and uses electric actuators to lift and tilt the mast, and to shift it sideways.

According to Susan Langer, SKF`s global program manager for industrial vehicle systems, the actuators are more efficient than hydraulic systems. They can recover energy and feed it to the on-board battery as the load is lowered. She predicts that the quiet, precise, maintenance-free actuators will be more reliable than hydraulics and will save money over the life of the vehicle.

The mast height control system incorporates a bearing with sensor electronics to detect the height, speed and acceleration of the mast. As the mast is raised or lowered – carrying a load of up to 3.5 tonnes – it sends out a continuous signal to a dual-redundant controller which displays the values on a digital readout. On-board communications are via a CANbus system.

Other claimed advantages for the electrical lifting system are that it: avoids the risk of oil leakages; does not need complex peripherals; is insensitive to temperature; and gives the operator a clearer view. When the actuators are at a standstill, they stay in position, unlike many hydraulic systems which need additional brakes.

The E-truck uses a "steer-by-wire" system with no direct mechanical linkages to the wheels. This will allow truck manufacturers to program the "feel" and the number of lock-to-lock turns for their vehicles. The steering sensitivity could also vary with speed.

The 7.5kW direct drive wheel motors, developed for the role by a Dutch company, avoid the need for a gearbox and can also recover energy when braking.

At present, there are no plans to put the E-truck into production, but SKF is demonstrating the technology to the forklift industry. Initially, at least, the all-electric system would probably be more costly to produce than a traditional system.

  • To view a digital copy of the latest issue of Drives & Controls, click here.

    To visit the digital library of past issues, click here

    To subscribe to the magazine, click here



Drives Show 2024The next Drives & Controls Exhibition will take place in Birmingham, UK, from 16-18 April, 2024. For more information on the event, visit the Show Web site


"Do you think that robots create or destroy jobs?"


Most Read Articles