Flower-inspired thermal imaging satellite relies on tiny motors

A UK-developed thermal imaging telescope due to be launched next year will open up new ways to combat global warming and increase building efficiencies. A motor-driven unfolding mirror will reduce its size and boost its commercial viability for a variety of applications.
In the battle against climate change, it is crucial to minimise the heat escaping from buildings. Lost heat is expensive, so government agencies and businesses need to manage heat efficiency to control costs. The most effective way to do this is by using a heat map, generated from satellite imagery. Until now, such a technology has not been widely available, but this is set to change with the launch next year of Hibiscus – a new satellite that will bring down the cost of thermal imaging, opening the benefits of ultra-high resolution heat mapping to a wide range of applications.
The satellite to due to be placed in orbit at the end of 2026 by a SpaceX rocket. Its uses could include: heat mapping of vehicles for security purposes; monitoring urban energy use for sustainability planning; and assessing the performance of irrigation schemes. The satellite, equipped with a high-resolution camera, will capture thermal images to an accuracy of ±0.5ºC, in areas down to the size of a car.
A key commercial advantage of Hibiscus, which is being developed by Cambridge-based Super-Sharp Space Systems – a team that originated in the city’s University – is its low size and weight, combined with a folding design. It will occupy a much smaller volume than existing thermal imaging satellites, resulting in a much lower manufacturing and launch costs, and making satellite thermal imagery commercially viable for a larger market.
“With our telescopes, you will be able to get four times better resolution per unit cost, meaning that you can match the current state-of-the-art in thermal imaging from space using a satellite the size of a microwave,” explains SuperSharp’s CEO, Marco Gomez-Jenkins. “If our clients need higher image resolution, we can scale up to a larger platform with a larger version of our telescope to capture the sharpest thermal images available in the market.”
Onboard feedback
Critical to Hibiscus’ success is nanometre-precision control of its mirrors which reflect light from a target location towards the telescope’s sensors. An onboard metrology system measures the light, creating a feedback loop that automates the mirrors’ alignment.
“When you’re operating in low-earth orbit, there are a lot of changes in the environment because of thermal cycling,” Gomez-Jenkins explains. “The feedback loop involving the onboard metrology system will enable Hibiscus to update position automatically every 10 seconds to enable the capture of extremely sharp images. That’s a huge advantage because you don’t need to rely on manual operation of the telescope, 24/7, to update the desired position of the mirrors.”
Hibiscus gets its name from its five unfolding mirror “petals”, similar to those of the flower of the same name. Deploying these petals is fundamental to telescope’s ability to capture thermal images.
Once the satellite is in orbit, each petal will be driven by two maxon DCX motors with a high-efficiency GPX gearbox and extended temperature encoder. Four more DCX motors will control robot arms that assist with the fine adjustment of the mirror configuration.
Initially, the drive system needs to survive the extreme vibrations of launch. Once in space, the motors must operate in a vacuum, and withstand extremely low temperatures. The motors have been developed and tested to withstand the highest levels of shock and vibration.
The motors’ lubrication needs to prevent outgassing – the release of volatile substances trapped within lubrication when exposed to a vacuum. Outgassing can degrade the long-term performance of the drive, and cause condensation that can damage other components, so maxon has specified a vacuum-compatible grease. High solar radiation can also damage standard PVC insulation, so the motor and encoder use a PTFE alternative, with higher radiation resistance.
Gomez-Jenkins says that one of the factors that influenced the choice of the drive motors was their ability to operate in space. “Seeing that these motors had heritage in other space projects was a huge plus for us.”
The drive system required careful sizing. In a vacuum, heat cannot be removed by convection, and the only way of dissipating it is via conduction. To ensure long-term operation without overheating, the drive system is oversized compared to terrestrial applications, but the torque density and mass had to chosen to fit into the satellite’s compact footprint. The DCX motors ensure smooth control thanks to features such as an ironless core that removes cogging.
Prototypes of the Hibiscus satellite are undergoing rigorous testing. “Thermal imaging from space is still something very new,” says Gomez-Jenkins. “Not many organisations are aware what can be achieved, so we’re continuing to push the advantages of cost-effective, precise analysis of heat maps, for the benefit of a wide variety of applications.”

