The global site of the UK's leading magazine for automation, motion engineering and power transmission
23 October, 2018

Product and Supplier Search

Facebook

Micro-PLC is ’70 times faster and 10 times smaller'

06 October, 2014

California-based Maxim Integrated Products has announced a modular micro-PLC platform with a footprint that, it claims, is 10% the size of traditional PLCs, as well as needing 50% less power and running much cooler. The company also claims that the PLC’s digital outputs can process data 70 times faster than traditional designs, allowing faster production throughputs.

According to Maxim, one its PLCs containing six modules (a four-channel analogue input module, a single-channel analogue output module, an eight-channel digital input module, an eight-channel digital output module, a four-channel IO-Link master, and a dual RS-485 communications module) will fit in a box occupying 400cm3 (23in3).

It says that it has achieved this reduction in size using a “smart integration” philosophy that combines industrial system-level knowledge with a proprietary analogue process technology. This results in compact, high-performance digital input and output modules and power modules. It claims that the PLC’s footprint is ten times smaller than those of conventional modular PLCs currently on the market.

For example, Maxim’s four-channel analogue input card occupies a volume of about 2.7in3, compared to 27in3 for a traditional PLC equivalent.

The company adds says that its digital inputs can achieve power savings of 40–60% compared to standard discrete digital inputs. In addition, a power architecture based on synchronous rectification allows the PLCs to run up to 50% cooler than traditional systems that use non-synchronous rectification. This allows the PLCs to operate without cooling fans and for the I/Os to achieve higher densities.

Another of Maxim’s claims is that its digital outputs can process data 70 times faster than traditional designs because they use a special “push-pull” mode with a maximum 2µs delay. It says that most conventional digital inputs produce delays measured in milliseconds.

According to Maxim, its PLC will allow users to implement distributed Industry 4.0 systems using less power, with fewer parts and at lower costs. For example, a four-channel analogue input board costs US $39.

“Our customers can build smaller, faster, and more efficient industrial controllers that bring the vision of Industry 4.0 into the palm of their hands,” says Maxim’s executive director of business management, Jeff DeAngelis.

The PLC platform consists of five reference designs which can operate as stand-alone sub-systems. They can be configured and tested via USB link to a laptop.

Maxim claims that its micro-PLC has a footprint that is 90% smaller than conventional modular PLC designs

The high level of integration in the PLC system is said to cut component counts, improve reliability, and provide diagnostics that will help to cut maintenance costs and increase uptime.

To support the Industry 4.0 distributed model, Maxim has developed several other products that are interoperable with the Micro PLC platform. They include:

•  a 24-bit, 10mW, delta-sigma analogue-to-digital converter with integrated PGA (programmable-gain amplifier), which is claimed to  offer the highest signal-to-noise ratio and the lowest power in its class;

•  a 2.4–5.5V, 5A input switch-mode power supply with an efficiency of 92%; and

•  a tiny 4–60V, 100mA synchronous step-down DC-DC converter, that complies with the IEC 61131-2 PLC standard, and enables cooler operation.

Maxim specialises in developing analogue circuits that are smaller, smarter, and more energy efficient. It employs about 8,800 people worldwide and has annual sales worth around $2.4bn.




Magazine
  • To view a digital copy of the latest issue of Drives & Controls, click here.

    To visit the digital library of past issues, click here

    To subscribe to the magazine, click here

    To see the latest Products & Services Directory, click here

     

Exhibition

Birmingham 2020The next Drives & Controls Exhibition and Conference will take place in Birmingham, UK, from 21-23 April, 2020. For more information on the event, visit the Show Web site

Poll

"Do you think that robots create or destroy jobs?"

Newsletter
Newsletter

Events

Most Read Articles