The global site of the UK's leading magazine for automation, motion engineering and power transmission
25 June, 2017

Product and Supplier Search

Facebook
News » Product News 

6mm-wide safety relays are the ‘world’s thinnest’

15 April, 2015

At the Hannover Fair, Phoenix Contact has unveiled a 6mm-wide safety relay which, it claims, is the world’s narrowest and could result in space savings of up to 70%. The new PSRmini relays are small enough to be integrated directly in devices such as motor starters and are claimed to deliver a similar performance to larger safety relays.


Fieldbus analyser is ‘as easy to use as a multimeter’

08 April, 2015

Pepperl+Fuchs has unveiled a handheld device designed to simplify the commissioning and troubleshooting of fieldbus installations. The FieldConnex diagnostic device (FDH-1) has been designed to be easy to use without needing expert fieldbus knowledge, and can check a Profibus PA or Foundation Fieldbus H1 segment at the press of a button.


Wimes motors are designed for the UK water industry

08 April, 2015

ABB has announced a range of low-voltage motors designed specifically to comply with the latest version of the UK water industry’s Wimes (Water Industry Mechanical and Electrical Specification) standard. Wimes 3.03 issue 6, created by The Pump Centre and 17 UK water companies, was issued in October 2014 and defines the mechanical and electrical requirements for equipment used in the industry.


2016 edition of flagship CAD package makes its debut

27 March, 2015

Autodesk has announced the availability of a new version of its flagship CAD (computer-aided design) application, AutoCad. The 2016 edition includes scores of new functions, claimed to accelerate 2D and 3D design, documentation and collaboration, while “enriching the on-screen experience” when creating almost any shape.


‘Smart’ incremental encoders will cut the need for spares

11 March, 2015

The US encoder manufacturer, TR Electronic, has announced a new generation of programmable incremental rotary encoders that allow users to adjust and display absolute position, RPM, over-and under-speed, and count direction. TR calls the I__58:2 series encoders “intelligent” and says that they can do everything that an absolute rotary encoder can do.


Graphic touchscreen terminals boot up ‘twice as fast’

10 March, 2015

Rockwell Automation has announced a family of space-saving graphic terminals, which, it says, will cut boot-up times as well as improving touchscreen responsiveness. The Allen-Bradley PanelView 800 terminals, available in 4, 7 and 10-inch sizes, are powered by 800MHz processors and offer up to 256MB of flash and dynamic memory.


Next-generation PACs and PLCs share programming tools

05 March, 2015

Mitsubishi Electric has released new generations of two of its key controls ranges – Melsec iQ-R programmable automation controllers (PACs) and iQ-F compact PLCs. While they address different segments of the machine control, process control and automation markets, they share the same programming environment with other iQ models and are said to offer an improved user experience.


‘First full family’ of safe robots will open up new applications

05 March, 2015

The Californian robot-maker Precise Automation is launching what it describes as “the first full family of intrinsically safe benchtop collaborative robots”. The robots – which include Scara, six-axis articulated and Cartesian types – have been designed from scratch to work safely with humans, without needing costly, bulky and awkward safety barriers.


Card connects PCs to any industrial Ethernet network

04 March, 2015

The Swedish industrial communications specialist HMS Industrial Networks has announced a plug-in card that that can connect a PC to any industrial Ethernet network. The IXXAT INpact is a PCIe card that support numerous industrial Ethernet standards using a uniform protocol and a card-spanning API (application programming interface).


Compact controllers integrate displays and up to 64 I/O

02 March, 2015

At next month’s Hannover Fair, Siemens will be launching a pair of compact industrial controllers with integrated I/O and displays, as well as built-in measuring, metering and positioning functions. The Simatic S7-1511C, with 32 digital I/O ports, is just 85mm wide and offers a 60ns bit performance, while the S7-1512C, with 64 digital I/O, is 110mm wide with a 48ns bit performance.


PLC-free system is an alternative to replacing MCCs

27 February, 2015

US-headquartered Schweitzer Engineering Laboratories (SEL) has announced a centralised control system that monitors, controls and protects low-voltage motor installations. The motorMax system offers a low-cost alternative to replacing existing motor control centres (MCCs), while allowing users to keep up with modern safety requirements. It also eliminates the need for PLCs, thus simplifying motor management.


Two-speed gearbox offers efficient direct-drive option

27 February, 2015

The German drives specialist Stober has developed a two-speed gear gearbox that, it says, will improve the energy efficiency of machine tools. The PS box, which is available in two sizes (PS25 and PS30), was developed especially for use in the main spindle drives of machine tools. It offers a loss-optimised direct-drive mode (with a ratio of i=1) that delivers high speeds suitable for fine machining.


Vibration meter transmits motor data wirelessly

26 February, 2015

Fluke has announced a handheld vibration instrument that gathers data on the bearings and general health of motors and other rotating equipment, and can share it wirelessly in real time. The multifunction Fluke 805 FC meter can be used by troubleshooting personnel who need reliable, repeatable measurements of rotating equipment to make go/no-go maintenance decisions.


Siemens enters the synchronous reluctance fray

26 February, 2015

Siemens is entering the market for synchronous reluctance motors that ABB has dominated since launching its SynRM range in 2011. At the Hannover Fair in April, Siemens will unveil a series of synchronous reluctance motors and drives with outputs from 5.5–30kW that, it says, will deliver high efficiencies at both full and partial loads, high dynamic responses, and good speed consistency for precision control.


Module saves energy by stopping compressed air leaks

24 February, 2015

Festo has developed a device that monitors and regulates compressed air supplies automatically to cut energy consumption. When the MS6-E2M module detects a machine is in standby, it shuts down the compressed air supply, thus preventing air from escaping through leaks. It also monitors parameters such as flow and pressure.


Magazine
  • To view a digital copy of the latest issue of Drives & Controls, click here.

    To visit the digital library of past issues, click here

    To subscribe to the magazine, click here

    To see the latest Products & Services Directory, click here

     

Exhibition

Birmingham 2018The next Drives & Controls Exhibition and Conference will take place in Birmingham, UK, from 10-12 April, 2018. For more information on the event, visit the Show Web site

Poll

"Do you think that robots create or destroy jobs?"

Newsletter
Newsletter

Events

Most Read Articles